CH Accessories & Renewal Parts

Handle tie bar — joins handles of two adjacent single-pole CH breakers

Padlockable handle lockoff — single-, two-, or three-pole CH breakers (escutcheon mounted)

Padlockable handle lockoff — single-pole CH GFCI breaker (escutcheon mounted)

Padlockable bracket — locks handle of two-, three-, four-pole CH breakers

Padlockable lockoff — CH AFCI/GFCI/CAF/GFT breakers ON or OFF position

Handle lockdog — secures handle ON or OFF for single-pole CH breakers (handle mounted)

Padlockable lockoff — CC/CCH main breaker ON or OFF (screw mounted)

Padlockable lockoff — BW/CSR main breaker ON or OFF (escutcheon mounted)

Hold-down retainer kit for CH breakers — 8–42 circuit 125A/225A MLO loadcenters

Hold-down retainer kit for CH breakers — 2–4 circuit MLO loadcenters

Retaining bracket for backfed main breaker in CH loadcenter

Mounting base for two-pole CH breaker (70A max)

3/4-inch filler plates for CH branch breaker slots

Also available as CHFPP (5-pack)

3/4-inch filler plates — 5-piece multipack

CSR main breaker filler plate (with hardware)

CSR main breaker filler plate (sandalwood)

PON ground bar — 5 position, 2.39 in.

PON ground bar — 5 pos + 1 large (2/0), 3.39 in.

PON ground bar — 10 position, 4.05 in.

PON ground bar — 10 pos + 1 large (2/0), 5.05 in.

PON ground bar — 14 position, 5.39 in.

PON ground bar — 14 pos + 1 large (2/0), 6.39 in.

PON ground bar — 21 position, 7.72 in.

PON ground bar — 21 pos + 1 large (2/0), 8.72 in.

Legacy ground bar — 5 position, 2.54 in.

Legacy ground bar — 5 pos + 1 large (2/0), 3.59 in.

Legacy ground bar — 10 position, 4.29 in.

Legacy ground bar — 10 pos + 1 large (2/0), 5.34 in.

Legacy ground bar — 14 position, 5.69 in.

Legacy ground bar — 14 pos + 1 large (2/0), 6.74 in.

Legacy ground bar — 21 position, 8.14 in.

Legacy ground bar — 21 pos + 1 large (2/0), 9.19 in.

100A main breaker kit — 10 kAIC

Compatible with: Convertible CH loadcenters

125A main breaker kit — 10 kAIC

Compatible with: Convertible CH loadcenters

125A CSR main breaker kit — 25 kAIC, #2–300 kcmil

150A CSR main breaker kit — 25 kAIC, #2–300 kcmil

175A CSR main breaker kit — 25 kAIC, #2–300 kcmil

200A CSR main breaker kit — 25 kAIC, #2–300 kcmil

225A CSR main breaker kit — 25 kAIC, #2–300 kcmil

125A CSH main breaker kit — 35 kAIC, #2–300 kcmil

150A CSH main breaker kit — 35 kAIC, #2–300 kcmil

175A CSH main breaker kit — 35 kAIC, #2–300 kcmil

200A CSH main breaker kit — 35 kAIC, #2–300 kcmil

225A CSH main breaker kit — 35 kAIC, #2–300 kcmil

CC/CCH main breaker lug kit — (2) 300 kcmil

CSR main breaker lug kit — (2) 300 kcmil

125A main lug kit — also sub-feed lug blocks, 2-pole

Also used as 125A main lug kit for convertible loadcenters

125A sub-feed lug blocks — 3-pole

225A main lug kit — #4–300 kcmil (legacy panels only)

225A replacement main lugs — 200A/225A MLO or convertible (#1–300 kcmil)

Mechanical interlock — for two-, three-, and four-pole CH breakers

NOT suitable to transfer emergency power

Mechanical interlock kit — CH loadcenters with backfed CH main breaker (100/125A panels)

Order CHPHD hold-down kit separately for generator breaker

Mechanical interlock kit — CH loadcenters with CSR main breaker (150–225A panels)

Order CHPHD hold-down kit separately for generator breaker

Cover replacement latch — indoor loadcenters (sandalwood/brown)

Cover replacement latch — indoor loadcenters (white)

Door replacement latch — outdoor (NEMA 3R) loadcenters

Cover replacement latch — 14-5/16 in. wide loadcenters only (legacy)

Keyed door lock — 12–42 circuit, 100–225A loadcenters

Cover mounting screws (standard)

Cover mounting screws (white)

Spray paint — 12 oz can (white)

Spray paint — 12 oz can (sandalwood)

ANSI-61 light gray touchup paint — outdoor loadcenters

3/4 in. conduit hub — Group 1 (70/100/125A loadcenters)

1 in. conduit hub — Group 1 (70/100/125A loadcenters)

1-1/4 in. conduit hub — Group 1 (70/100/125A loadcenters)

1-1/2 in. conduit hub — Group 1 (70/100/125A loadcenters)

2 in. conduit hub — Group 1 (70/100/125A loadcenters)

2 in. conduit hub — Group 2 (150/200/225A loadcenters)

2-1/2 in. conduit hub — Group 2 (150/200/225A loadcenters)

3 in. conduit hub — Group 2 (150/200/225A loadcenters)

Adapter kit — install Group 1 hub on Group 2 knockout

Blank closure plate — Group 1 (small)

Blank closure plate — Group 2 (large)

Bonding kit — bonds neutral bus to PON loadcenter enclosure

CH plug-on neutral ground bonding strap

Bonding strap with screw

Isolated neutral assembly — computer circuits

Incoming 2/0 neutral lug (PON)

Incoming 300 kcmil neutral lug (PON)

Add-on neutral/ground lug (legacy)

Add-on neutral/ground lug (legacy)

Add-on neutral/ground lug (legacy)

Replacement neutral bar — B and C type boxes (legacy)

Replacement neutral bar — D type boxes (legacy)

Replacement neutral bar — E, G, J, K, L type boxes (legacy)

5-circuit terminal block for renovation

Circuit directory — (2) 42-circuit cards, (2) adhesive plastic sleeves

Circuit directory — adhesive backed

Blank deadfront directory marking strip

Circuit identification labels — preprinted breaker labels

Branch circuit numbering strip

Series rating caution label

Terminal insulator kit — CSR/CSH/BW/BWH mains

Terminal insulator kit — CH/BR/BRH/BRHH/BRX mains